Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Maruti
  4. :
  5. Alto
  6. : How to replace the front fog lights of the Maruti Alto?

Maruti Alto - Video tutorial

Model: Maruti Alto AOD - Years 2012-2019
Part: Fog lights
Operation: How to replace the front fog lights of the Maruti Alto?

If it is our intention to customize the car by mounting front fog lights on the car (after market purchase), it is necessary to proceed as follows: obtain a 10 mm wrench and open the engine hood. Remove the screws located above the front mask (there are also two clips to unhook) then remove the screws located inside the mudguard and the two located under the bumper. At that point it will be possible to remove the bumper assembly. Then proceed to unhook the fog light by releasing the power supply clamp and take the new light to position it on the bumper. Finally, proceed to reassemble all the components backwards.


Posted on 5 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos