Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Exterior Rearview Mirror of the Maruti Alto Lx rf

Model: Maruti Alto RF - Years 2000-2014
Part: Side mirror

This guide shows how to replace the exterior rearview mirror of the Maruti Alto Lx rf. The first step is to remove the small triangular trim panel that covers the mounting bolts of the mirror. Remove the three mounting screws of the part to be replaced using a Phillips screwdriver, holding it to avoid damaging the body. Remove the part to be replaced and clean the contact area of dirt. Install the new exterior rearview mirror and secure it with the screws. Reinstall the trim panel to complete the operation.

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the handbrake of the Maruti Alto
How to adjust the handbrake of the Maruti Alto
Maruti Alto (2012-2019 / AOD) In this short and simple guide, we will see how to adjust the handbrake lever of the Maruti Alto and Suzuki Alto. First of all, we get into the car a…
How to Replace the Key Battery of the Maruti Alto
Maruti Alto (2012-2019 / AOD) If your Maruti Alto key has suddenly stopped working, you likely need to replace the battery inside. If you don't know how to do it, carefully read t…
Replacing the Timing Belt on a Maruti Alto
Replacing the Timing Belt on a Maruti Alto
Maruti Alto (2000-2014 / RF) Today, let's go through the main steps to remove and replace the timing belt on a Maruti Alto and Suzuki Alto. First, open the hood and start by remo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos