Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil in a Maserati Ghibli DIY

Model: Maserati Ghibli MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Air filter

Video tutorial

To change the oil in a Maserati Ghibli, work with the engine warm (not hot) and on a level surface. Secure the car with axle stands/ramps, engage the handbrake, and prepare a large container for collecting the used oil. If present, remove the lower cover to access the sump.

Locate the drain plug, position the container, and unscrew the plug to let the oil drain completely. Once the draining is finished, refit the plug with its washer/seal in good condition (if replaceable, a new one is better) and tighten to the correct torque specified in the Maserati Ghibli manual (do not overtighten).

Next, move on to the oil filter: remove the necessary access, replace the filter element and any seals/O-rings on the cover (lightly lubricating them with clean oil), then close it properly without pinching the seals. Now, open the filler cap, pour in the new oil with the grade specified for your Maserati Ghibli, and close it. Start the engine for a few seconds, turn it off, and check for any leaks around the drain plug and filter.

After a few minutes, check the oil level (according to the monitoring system on the car) and adjust if necessary without exceeding the maximum.


Posted on 10 July 2026 by ScegliAuto


Related tutorials

Maserati Ghibli (2013-2024 / MK 1) Today, we will see how to perform the routine maintenance oil change for the Maserati Ghibli in simple and quick steps. First, lift the vehicle and u…
Maserati Ghibli (2013-2024 / MK 1) If you own a 2015 Maserati Ghibli and want to change the air filter without professional help, simply read this guide and follow the instructions. Fi…
Maserati Ghibli (2013-2024 / MK 1) If the smart key of your Maserati Ghibli has suddenly stopped working or often has detection issues, it means the battery is completely exhausted and…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos