Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Mazda CX-5 key fob battery.

Model: Mazda CX-5 MK 2 - Years 2017-2024
Part: Key

Let's discover the necessary instructions in order to disassemble the remote control to replace its battery on the key of the Mazda CX-5, in simple steps. First, take the remote control in your hand and start levering on the side slot of the remote control to open it in two parts, thus accessing the battery compartment; remove the cover to then remove the battery, as shown in the video. At this point, install the new battery, of the correct type (in this case a CR 2032 3V); insert it in the correct direction and test the buttons' functionality!

Posted on 25 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the key and replace the battery of the Mazda CX-5 remote control
How to disassemble the key and replace the battery of the Mazda CX-5 remote control
Mazda CX-5 (2012-2017 / MK 1, KE) Today's information will allow us to disassemble the key for replacing the battery of the Mazda CX-5 remote control. First, we take our remote contro…
Replacement of the battery of the key remote of the Mazda CX-5.
Replacement of the battery of the key remote of the Mazda CX-5.
Mazda CX-5 (2017-2024 / MK 2) Following these brief and simple steps, we will see how to disassemble and replace the battery of the key remote for the Mazda CX-5. First, take the …
How to replace the battery of the Mazda CX-5 key remote control
How to replace the battery of the Mazda CX-5 key remote control
Mazda CX-5 (2017-2024 / MK 2) Today we will see how to disassemble and replace the battery of the remote key of the Mazda CX-5. First of all, we take our remote control and start …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos