Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to add engine oil to the tank of the Mazda Premacy.

Model: Mazda Premacy CP - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Engine oil

Video tutorial

Today we will explain how to top up the engine oil and its reservoir on a Mazda Premacy vehicle. Before performing this operation, it is important to ensure that the oil level is below the recommended level.

Let's open the front hood, and after letting the vehicle rest for 10 minutes, we will remove the oil reservoir cap. We will take out the dipstick and insert it into the reservoir. We will clean the dipstick and reinsert it to check the amount of oil present inside.

If the amount of oil is low, we will pour engine oil into the reservoir and check again with the dipstick to know the amount of oil added, which should be above the maximum or between the maximum and minimum levels.


Posted on 3 December 2025 by ScegliAuto


Related tutorials

Where to Find the Fuse Box on the Mazda Premacy
Where to Find the Fuse Box on the Mazda Premacy
Mazda Premacy (1999-2014 / CP) By following these simple steps, you will be able to locate all the various fuses present in your Mazda Premacy in just a few seconds. First, enter t…
How to Replace the Rear Brake Pads on a Mazda Premacy
How to Replace the Rear Brake Pads on a Mazda Premacy
Mazda Premacy (1999-2014 / CP) This guide shows you the steps to remove and replace the rear brake pads on a Mazda Premacy. First, lift the vehicle and start by removing the rear w…
How to replace the cabin air filter on the Mazda Premacy?
How to replace the cabin air filter on the Mazda Premacy?
Mazda Premacy (1999-2014 / CP) If you intend to replace the cabin air filter on this vehicle yourself, you can find the instructions on how to proceed in this description. First, a…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos