Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. CX-5
    4. : Hill restart assistance system

Mazda CX-5 - Video tutorial

Model: Mazda CX-5 MK 1, KE - Years 2012-2017
Part: -board computer
Operation: Hill restart assistance system

This is a system that facilitates hill starts by preventing the vehicle from rolling back. A regular hill start normally (without the Hill Launch Assist system) would require considerable coordination skills on the part of the driver: keep the car stationary with the handbrake by progressively disengaging the clutch and accelerating at the same time; as soon as the inertia is overcome, the handbrake can be gradually released. The HLA system eliminates the need for the driver to hold the handbrake and, instead, automatically holds the car "locked", for up to 2.5 seconds, while the driver's foot moves from the brake pedal to the pedal. 'accelerator. As soon as the available torque is sufficient, the HLA releases the brakes, without the risk of stalling or retreating.


Posted on 15 July 2023 by ScegliAuto



How to reset the i-stop system on the Mazda CX5.
Mazda CX-5 (2017-2023 / MK 2) In this video, we see how to reset the i-stop system on the Mazda CX5, with the help of the Delphi BOT. i-stop is nothing more than Mazda's start & s
How do you deactivate the i-Stop system of the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) In order to deactivate the i-Stop system of the Mazda CX-5, you need to connect a diagnostic tool to the OBD port of the vehicle: this port is locate
How to locate the fuses and know their diagrams in a Mazda CX 5
Mazda CX-5 (2012-2017 / MK 1, KE) The first fuse box of a Madza CX-5 car can be located inside the passenger compartment of the vehicle, exactly behind the plastic cover at the bottom

    Frequently Asked Questions

    • Cx 5 2012-2017 - How does the tire pressure light on Mazda cx 5 go out? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos