Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Engine Oil and Oil Filter

Model: Mazda Rx 8 MK 1 - Years 2003-2012
Part: Engine oil

Lift the vehicle using appropriate car ramps and unscrew the drain plug of the oil sump located on the side, collecting the used oil in a suitable container. Next, replace the oil filter cartridge located at the rear, behind the air filter housing: it is preferable to use the appropriate socket wrench to remove it. Then fit the new filter after coating the seal with oil (do not exceed the tightening torque) and fill the engine with new oil according to the quantities and SAE specifications indicated in the user and maintenance manual.

Updated on 7 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Mazda Rx 8 (2003-2012 / MK 1) The gearbox oil also requires periodic replacement, but if you experience gear engagement issues, it is advisable to replace the oil in the gearbox. …
Mazda Rx 8 (2003-2012 / MK 1) Here’s how to change the oil and oil filter on your vehicle: open the bonnet and unscrew the oil filler cap located under the engine cover. Lift the …
Mazda Rx 8 (2003-2012 / MK 1) On the Mazda RX-8, the oil change procedure begins with securely lifting the vehicle and protecting the work area. If present, remove the lower splas…

Other guides you may be interested in

How to Open the Fuel Cap of the Volkswagen Jetta

When you need to refuel this vehicle, first open the fuel filler flap. Follow these simple instructions, and you can also watch the video for more details. First, unlock the central locking to open the flaps. Then, press the fuel cap with your hand to unlock it and open it. Underneath, you will find the fuel cap, which you need to unscrew counterclockwise. At this point, you can proceed to refuel.

Watch the video!


by ScegliAuto

More videos