Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing Aux Adapter Accessory Kit and Removing Car Radio

Model: Mazda 6 GH, MK 2 - Years 2008-2012
Part: Accessory kit

To install an Aux input, it is necessary to remove the car radio to which the kit's control unit and the corresponding output cable will be connected. Start by removing the storage compartment under the handbrake; unscrew the gear lever knob and remove the plastic trim around the lever and on the sides of the tunnel, as well as the trim containing the storage compartment. Then unscrew the mounting screws of the climate control buttons to access the lower screws of the car radio; at this point, unclip the air vents located in the centre of the dashboard to access the other two mounting screws of the radio. Now you can pull the car radio forward and connect the kit's control unit with the supplied wiring harness, then reposition it and place the Aux output in the desired location.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Installation of accessory adapter kit for iPhone, iPod and AUX
Installation of accessory adapter kit for iPhone, iPod and AUX
Mazda 6 (2002-2008 / GG, MK 1) For this installation, you need a screwdriver and a ratchet spanner with an extension, along with the accessory kit. Start by removing the gear knob …
How to Add an AUX Input to Your Car Radio
Mazda 6 (2002-2008 / GG, MK 1) Adding an AUX output to your car radio means you can connect any device that has a minijack output. This can be useful for listening to music or conn…
Installing iPod Adapter and Removing Centre Console
Mazda 6 (2008-2012 / GH, MK 2) The video shows how to detach the plastic covers along the centre console, specifically the one near the handbrake and the one near the gear lever: b…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos