Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing and Replacing the Headlamp

Model: Mazda 6 GG, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Headlight

See other generations:
Video tutorial

The following is a task that can be performed with a few common tools; it is not technically difficult. To remove the headlamp, you need to take off the front bumper, which is secured to the chassis with screws and various clips.

You will need to lie under the bumper to unscrew the screws; this can also be done using a Torx screwdriver. After removing the screws, take out the clips that are visible when opening the bonnet.

Then, remove the side bolts located in front of the front wheels. Once the bumper is removed, you will be left with a bare vehicle.

Remove the trim located under the headlamp, then lift the tab and disconnect the connectors attached to the headlamp.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

Replacing the Front Headlamp Bulb on a Mazda 6
Replacing the Front Headlamp Bulb on a Mazda 6
Mazda 6 (2008-2012 / MK 2, GH) In this tutorial, you will learn how to replace the halogen/xenon bulb in the front headlamp of a Mazda 6. You won't need to remove the headlamp or a…
Replacing Front Headlamp Bulb on Mazda 6
Replacing Front Headlamp Bulb on Mazda 6
Mazda 6 (2008-2012 / MK 2, GH) Are the front headlamp bulbs on your Mazda 6 blown? Here’s how to replace them. Open the front splash guard by pulling the lever located at the botto…
How to Remove and Reinstall the Airbox
How to Remove and Reinstall the Airbox
Mazda 6 (2002-2008 / GG, MK 1) In the following video, you will see a skilled guide demonstrating the removal and reinstallation of an airbox from a car. This process allows you to…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos