Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Aftermarket Xenon Bulbs

Model: Mazda 3 BK, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Xenon headlight kit

See other generations:
Video tutorial

This video shows how to install an aftermarket xenon bulb kit on your car. First, remove the old bulbs by unscrewing them from their housing and disconnecting the bulb secured by a bayonet. Once the bulb is removed, connect the control unit to its terminals, which will power the new xenon bulb.

From the control unit, two additional wires will connect to the xenon bulb itself. Once the xenon bulb is secured in its housing and all connections are made, test the setup.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Installation of LED Front Headlights
Installation of LED Front Headlights
Mazda 3 (2009-2013 / BL, MK 2) Replacing the bulbs in the front headlights with LED ones is a good solution as these lamps not only give the vehicle a more modern and appealing loo…
Front Headlamp Bulb Replacement
Front Headlamp Bulb Replacement
Mazda 3 (2003-2009 / BK, MK 1) To replace the front headlamp bulb, first remove the plastic covers located directly above the headlamp to access the bulb holder. Disconnect the pow…
Installation of LED Interior Lights
Installation of LED Interior Lights
Mazda 3 (2009-2013 / BL, MK 2) Installing LED interior lights will give the car a much more modern and appealing look while also improving internal visibility. Before proceeding wi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos