Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in a Mazda RX-8

Model: Mazda Rx 8 MK 1 - Years 2003-2012
Part: Cabin air filter

In this video tutorial, see how to replace the cabin filter in a Mazda RX-8 by following some simple steps that allow you to work independently. First, purchase a new cabin filter from an authorised dealer. Next, get into the vehicle, turn off the engine, and pull the handbrake. The pollen filter in this vehicle is located behind the glove compartment, so remove all items inside it. With the drawer open, press in on the sides to lower it completely, then detach the right side pin. Now you can remove the housing from its seat. The next step is to remove the filter cover and extract the filtering element from its housing. Position the new filter according to the arrows on the filter itself.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter on a 2006 Mazda RX8
How to Replace the Cabin Air Filter on a 2006 Mazda RX8
Mazda Rx 8 (2003-2012 / MK 1) If you want to independently replace the cabin air filter in your 2006 Mazda RX8, simply follow all the steps described in this guide. Before startin…
How to Change the Oil and Oil Filter on the Mazda RX-8
How to Change the Oil and Oil Filter on the Mazda RX-8
Mazda Rx 8 (2003-2012 / MK 1) Here’s how to change the oil and oil filter on your vehicle: open the bonnet and unscrew the oil filler cap located under the engine cover. Lift the …
How to Replace the Air Filter on the Mazda RX-8
How to Replace the Air Filter on the Mazda RX-8
Mazda Rx 8 (2003-2012 / MK 1) Are you planning to replace the air filter on this car model? The description below provides everything you need for the replacement, and you can als…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos