Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in the Mazda Biante?

Model: Mazda Biante MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Engine oil

Video tutorial

As many know, when performing a complete engine oil change, it is also important to replace the oil filter. The Mazda Biante is no exception.

Consult the owner's manual to find out the type of oil recommended by the manufacturer and the quantity needed for your vehicle. After gathering everything you need, lift the vehicle and locate the oil drain bolt.

Open it just long enough to let the old engine oil drain out, then proceed to replace the filter located nearby. Finally, open the hood and pour the new engine oil into the designated filler neck.


Updated on 23 July 2026 by ScegliAuto


Related tutorials

Where to Find the OBD Port on the Mazda Biante
Where to Find the OBD Port on the Mazda Biante
Mazda Biante (2008-2018 / MK 1) If you still can't find the OBD port on your Mazda Biante after several attempts, don't worry. Just follow these instructions to clear up any doubts.…
How to Open the Manual Ignition Key on Mazda Biante
Mazda Biante (2008-2018 / MK 1) If the Mazda Biante won't start with the electronic key, you can start it with the physical key. Like many European vehicles that can be opened with …
How to Replace the Throttle Body on a Mazda Biante?
How to Replace the Throttle Body on a Mazda Biante?
Mazda Biante (2008-2018 / MK 1) To replace the throttle body on a Mazda Biante, open the hood to access the components inside the engine compartment. Remove the air filter box compl…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos