Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the automatic transmission of the Mazda 5

Model: Mazda 5 MK 1 - Years 2005-2015
Part: Transmission

In this guide, we will see the instructions that will allow us to disassemble and replace the entire automatic transmission box of the Mazda 5. The process of disassembling the transmission is complex and requires a lot of patience; first, we open the engine hood and start by removing the battery, disconnecting the various pipes and wiring, as shown in the video. At this point, we remove the engine support and the transmission box support by unscrewing the bolts; then we disconnect both front half-shafts, draining the oil. We unscrew the screws of the transmission box to separate it from the engine block, following the video tutorial until the end!

Posted on 26 July 2023 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the Mazda 5?
Where is the fuse box located in the Mazda 5?
Mazda 5 (2005-2015 / MK 1) To find the box that contains all the fuses of your Mazda 5 in just a few seconds, you need to carefully read the following guide and apply the descr…
Replacement of the timing belt of the Mazda 2.
Replacement of the timing belt of the Mazda 2.
Mazda 5 (2005-2015 / MK 1) Today's guide will illustrate the main steps for disassembling and replacing the timing belt of the Mazda 2. First, we open the car's engine hood and…
How to replace mazda 5 key battery
How to replace mazda 5 key battery
Mazda 5 (2005-2015 / MK 1) To complete the replacement of the button cell battery inside the key of your Mazda 5 (year 2005-2015) yourself, just read the following guide carefu…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos