Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Air Conditioning Gas Recharge Instructions

Model: Mazda 3 MK 2, BL - Years 2009-2013
Part: Air conditioning

If the air conditioning is activated but the air coming from the vents is not cold enough, it is likely that there is insufficient gas in the system. In this case, it is advisable to check for leaks using a tracer or by properly vacuuming the system with the appropriate equipment. However, for practicality, you can immediately try adding more gas to the circuit: there are disposable cans available on the market with a specific attachment. Connect the can to the valve, start the engine, turn on the air conditioning, and add the gas while monitoring the air temperature to ensure it gets colder.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Air Conditioning Compressor Replacement
Air Conditioning Compressor Replacement
Mazda 3 (2003-2009 / BK, MK 1) To replace the air conditioning compressor, lift the vehicle on a hydraulic lift as the compressor is located at the bottom of the engine bay. Once t…
Instructions for Disassembling Air Conditioning Pipes
Instructions for Disassembling Air Conditioning Pipes
Mazda 3 (2009-2013 / MK 2, BL) The pipes that transport refrigerant gas in the air conditioning system have a unique fastening system at the connection points. It is a type of quic…
How to remove the climate control console in the Mazda 3?
How to remove the climate control console in the Mazda 3?
Mazda 3 (2003-2009 / BK, MK 1) In this tutorial, you can see how to remove the climate control console in the Mazda 3, a very simple and quick operation. First, ensure that the key…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos