Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on a Mazda 6?

Model: Mazda 6 GJ, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tire pressure warning light

See other generations:
Video tutorial

In this tutorial, you will learn how to reset the tyre warning light on a Mazda 6. This operation is extremely simple and quick, to be performed only once the correct pressure of each tyre is restored, following the instructions in the manual. Start by entering the cabin, then insert the key and turn on the instrument panel; it is not necessary to start the engine.

Next, locate the button depicting the warning light, which is situated on the left side of the dashboard, and hold it down until the warning light disappears from the display.


Updated on 28 September 2026 by ScegliAuto


Related tutorials

How to reset the tyre warning light on the Mazda 6?
Mazda 6 (2012-2024 / GJ, MK 3) Resetting the tyre warning light on the Mazda 6 is an extremely simple and quick operation. Before proceeding, ensure that you have restored the corr…
Resetting the Tyre Pressure Warning Light on a Mazda 6
Resetting the Tyre Pressure Warning Light on a Mazda 6
Mazda 6 (2012-2024 / GJ, MK 3) Follow today's instructions to reset the tyre pressure warning light (TPMS) on the Mazda 6; before performing the reset, ensure that all four tyres a…
How to reset the service light on the Mazda 6?
How to reset the service light on the Mazda 6?
Mazda 6 (2012-2024 / GJ, MK 3) In this tutorial we can see how to reset the service in the Mazda 6, an extremely simple and quick operation, to be carried out only once all schedul…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos