Do it yourself
Frequently asked questions about cars and motorcycles

Resetting the Service Light on the Mercedes C-Class

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Service warning light

See other generations:
Video tutorial

After replacing the engine oil in the Mercedes C-Class, you need to reset the system that alerts you, with a reminder on the instrument display, about the necessity of this important maintenance intervention. Sit in the driver's seat, turn the key to position one, and with the mileage displayed on the central screen, press the "r" button three times to the left of the speedometer.

Turn the ignition key to position two, and using the buttons on the left side of the steering wheel, select the maintenance menu. Press the "r" button again, select the standard oil type, confirm, and press the "r" button for three seconds to complete the reset.


Updated on 25 October 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2014-2021 / W205) .. of the engine oil change on the Mercedes C-Class. First, get inside the vehicle and turn on the ignition by pressing the start button. Next, press.. …
Mercedes Classe C (2007-2013 / W204) .. how to reset the service light on a Mercedes C-Class vehicle. To reset the light on 2010 models, turn on the ignition and press the button located to.. …
Mercedes Classe C (2000-2007 / W203) .. regular oil change maintenance on a Mercedes C-Class W203. First, get inside the car and turn on the ignition; then press the button located at the.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos