Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear bumper of the Mercedes E-Class

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Rear bumper

Following these simple and quick steps, we will see how to disassemble and replace the rear bumper of the Mercedes E-Class. First, open the rear trunk door and start removing all the plastic clips found above and below the bumper; unscrew the additional screws found on both sides of the wheel arches, as shown in the video. At this point, gently detach the bumper on the sides until it is completely removed, then install the new one, securing it properly and connecting the parking sensors if present.

Posted on 20 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble and replace the front bumper grille of the Mercedes E-Class
How to disassemble and replace the front bumper grille of the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. the front bumper grille of the Mercedes E-Class. First of all, we open the hood of the car and start disconnecting the air intake hose; then we.. …
How to disassemble the front bumper on the Mercedes E-Class?
How to disassemble the front bumper on the Mercedes E-Class?
Mercedes Classe E (2016-2023 / W213) .. Disassembling the front bumper in the Mercedes E-Class, as we can see in this tutorial, is an extremely simple and fast operation. First of all, we open.. …
How to remove the rear bumper of the Mercedes E-Class
How to remove the rear bumper of the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) If you have to carry out a repair on the rear bumper, it is always better to remove it and work comfortably on the stands rather than on the car; eve…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos