Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Pump on a Mercedes C-Class

Model: Mercedes Classe C W205 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Fuel pump

See other generations:
Video tutorial

How to remove the fuel pump on a Mercedes C-Class? First, disconnect the battery cables. Then, remove the rear seat cushions from the car. Use a screwdriver to remove the screws securing the metal cover and take it out of its place.

Use absorbent paper around the perimeter to soak up any fluid leaks. Use a chisel to unscrew the large securing pin of the fuel pump, disconnect the power connectors and the fluid circulation hoses.

Extract the floating fuel pump from its housing along with the attached parts. Finally, install a new piece.


Updated on 3 March 2026 by ScegliAuto


Related tutorials

Replacing the Fuel Pump Relay on a Mercedes C-Class
Replacing the Fuel Pump Relay on a Mercedes C-Class
Mercedes Classe C (2000-2007 / W203) .. to locate the fuel pump relay on a Mercedes C-Class. First, open the trunk lid and start removing the carpeted side cover; inside, you will find the.. …
How to Replace the Fuel Pump on a Mercedes-Benz C-Class
How to Replace the Fuel Pump on a Mercedes-Benz C-Class
Mercedes Classe C (1993-2000 / W202) .. fuel pump and its filter on a Mercedes-Benz C-Class. First, lift the rear of the vehicle slightly and begin by removing the fuel filter, disconnecting.. …
Replacing the Fuel Pump on the Mercedes C-Class
Replacing the Fuel Pump on the Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. and replace the fuel pump on the Mercedes C-Class. First, open the rear doors and start by removing the rear seat by lifting it up; then remove the.. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos