Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing a Bluetooth Accessory Kit

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Accessory kit

See other generations:
Video tutorial

First, place the gear shift lever in reverse to facilitate the subsequent disassembly operations. Open the ashtray and detach the trim around the gear shift boot to access the fastening tabs of the ashtray itself, unclip them, and remove it. Unscrew the 2 mounting screws of the panel located just below the glove compartment on the passenger side, unclip it from its seat, and pass the wiring for the Bluetooth system control unit between the ashtray seat and the panel just removed.

Then disconnect the connector located just below the radio (the one with the two orange wires), remove the blue lock and the output signal terminal from the connector to connect it to the wiring of the accessory kit; likewise, insert the terminal of the wiring into the original connector and reconnect it. Connect the power wires of the Bluetooth control unit and those of the cigarette lighter, ensuring to respect the polarity.

Position the microphone on the rearview mirror, running the corresponding cable along the edge of the headliner and then through the pillar seal.

Finally, secure the control unit and reassemble everything previously removed, ensuring to position the wiring properly.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

Installing Xenon Headlight Kit
Installing Xenon Headlight Kit
Mercedes Classe E (1984-1995 / W124) Improving visibility at night is always recommended, so obtain the necessary kit for the modification and proceed as follows. Open the hood and remov…
How to Inflate Tires on a Mercedes E-Class
How to Inflate Tires on a Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) How to use the inflating kit on a Mercedes E-Class? Let's look at the inflating and sealing kit. Connect the 12-volt cigarette lighter plug (keep the…
How to Install Carbon Mirror Caps and Door Handle Covers on a Mercedes E-Class W212
How to Install Carbon Mirror Caps and Door Handle Covers on a Mercedes E-Class W212
Mercedes Classe E (2009-2016 / W212) In this video, you can see how to easily install carbon fiber caps for the side mirrors and door handle covers. These dedicated accessories can be fo…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos