Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Rear Brake Pads

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Brake pads

See other generations:
Video tutorial

Lift the vehicle at the wheel where you will perform the repair and remove the wheel. Using a punch and hammer, remove the central retaining pin of the pads and the retaining spring.

Leverage the pads to retract the activation piston, creating enough space to accommodate the new pads; then remove the worn pads and insert the new ones. At this point, reposition the retaining spring (the wider part should face down) and reinsert the pin until it is fully seated.

Reinstall the wheel, proceed in the same manner to replace the other pads, and before driving, pump the brake pedal until it offers the right resistance, paying attention to the first braking. Class C Sport Coupe


Updated on 3 February 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2014-2021 / W205) Discover the steps to remove and replace the rear brake pads on the Mercedes C-Class. First, lift the vehicle and start by removing the rear wheel af…
Mercedes Classe C (2007-2013 / W204) The instructions provided in this guide will show us how to disassemble and replace the rear brake pads of the Mercedes C-Class. First, let's lift th…
Mercedes Classe C (2007-2013 / W204) To change the rear brake pads on a Mercedes C-Class, lift the car with a jack on the side where you will perform the replacement. Remove the wheel an…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light in the Suzuki Swift?

To reset the tyre pressure warning light in the Suzuki Swift, turn on the ignition, then navigate through the menu using the button located on the right side: this button should be rotated to locate the options displayed. You will need to select the option indicating tyre pressure and then select the "Reset" option: this way, the sensors will read the new tyre pressure values. If the tyres have been inflated to the correct pressure, the light will turn off automatically.

Watch the video!


by ScegliAuto

More videos