Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windshield Wiper Blade on a Mercedes GLE

Model: Mercedes Gle V167 - Years 2019-2026
Part: Windshield wipers

Replacing the rear windshield wiper blade on a Mercedes GLE is a simple and quick task you can do yourself. To perform this modification, lift the wiper arm off the rear windshield and position it vertically. Grasp the center of the wiper arm and pull the blade off. Insert the new blade into the arm, sliding it in and securing the center part. After the replacement, position the blade horizontally on the rear windshield and test its operation by activating the washer function. If the wiper arm does not function, check the fuse.

Posted on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Windshield Wiper Blades on a Mercedes GLE
How to Replace Windshield Wiper Blades on a Mercedes GLE
Mercedes Gle (2019-2026 / V167) To replace the wiper blades on a Mercedes GLE 450 like the one in the video (but applicable to most modern Mercedes), put the wipers in service posit…
How to top up the windshield washer fluid on a Mercedes GLE
How to top up the windshield washer fluid on a Mercedes GLE
Mercedes Gle (2015-2019 / C292) In this video, we see how to top up the windshield washer fluid on any Mercedes vehicle, even though we are specifically working on a GLE. The fluid …
Where are the Fuses Located in the Mercedes GLE?
Where are the Fuses Located in the Mercedes GLE?
Mercedes Gle (2015-2019 / C292) The fuses in the Mercedes GLE are housed in dedicated fuse boxes designed to contain them: in this type of vehicle, you will find four boxes that hol…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos