Do it yourself
Frequently asked questions about cars and motorcycles

How to Check the Fluids of the Mercedes A-Class

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Checks and maintenance

See other generations:
Video tutorial

Today, learn how to check the fluids of the Mercedes A-Class model W169. To perform the fluid check, open the hood. The first fluid to check is the engine oil. The engine oil reservoir is located on the right side of the vehicle.

Unscrew the cap and remove the dipstick. If the level is below the minimum or close to it, top off the fluid.

The second fluid to check is the coolant. The reservoir is transparent, so you can check the level from the outside.

If the level is below the minimum or close to it, top off the fluid. The third fluid to check is the brake fluid; it also has a transparent reservoir, so the fluid level can be checked from the outside.

Top off in the same way, and the same applies to the fourth and final fluid to check, the windshield washer fluid. These checks should be performed twice a year.


Posted on 9 March 2026 by ScegliAuto


Related tutorials

Mercedes Classe A (2018-2026 / W177) .. the front passenger airbag on a Mercedes A-Class. Like most models from the manufacturer, the front passenger airbag is automatically activated.. …
Mercedes Classe A (2018-2026 / W177) .. To replace the air filter of the Mercedes A-Class, you will need to open the hood to gain access to the components inside the engine compartment... …
Mercedes Classe A (1997-2004 / W168) .. various fuses for the cabin of your Mercedes A-Class W168, then this guide is what you need. In fact, just read it carefully and follow the steps to.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Classe A 2012-2018 - Where is the exterior temperature sensor of the Mercedes A-Class located? Read answer
    • Classe A 2018-2026 - Where is the Mercedes A-Class jack located? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos