Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the ESP Light on a Mercedes Sprinter

Model: Mercedes Sprinter MK 3, Br910, Br907 - Years 2018-2026
Part: Warning light – error code

In this video, you will learn how to reset the ESP light on a Mercedes Sprinter: this message appears especially when the battery is flat or has been replaced; in short, there has been a loss of power. In this case, the steering angle sensor loses its calibration, which can be easily reset manually. Turn on the ignition and turn the steering wheel all the way to the left. Hold this position for 2-3 seconds. Then turn the wheel to the opposite position, holding it to the right for another 3 seconds. Gently return to the centre, turn off the vehicle and remove the key. Wait about ten seconds and then start the engine. The ESP light should now be off.

Posted on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Sprinter (2006-2018 / MK 2, W906) The Service light on a Mercedes Sprinter can be reset by turning on the ignition and holding the 0 button for a few seconds until you hear a beep and…
Mercedes Sprinter (2006-2018 / MK 2, W906) To reset the Service light in the Mercedes Sprinter, turn the key to activate the instrument cluster and hold down the 0 button for a few seconds unt…
Mercedes Sprinter (2018-2026 / MK 3, Br910, Br907) In this new guide for all you owners of a Mercedes Sprinter 907 (2018-2023), we will discover how to manually reset the service light that remains on…

Other guides you may be interested in

    Frequently Asked Questions

    • Sprinter 2006-2018 - What does the "EDC" light on the Mercedes Benz Sprinter Mk2 mean? Read answer
    • Sprinter 2006-2018 - What are the warning lights of the Mercedes Sprinter? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos