Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper and Left Headlight on a Mercedes GLE DIY

Model: Mercedes Gle V167 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Headlight

See other generations:
Video tutorial

To remove the left front headlight on the Mercedes GLE, start by securing the vehicle, opening the hood, and turning the front wheel to access the wheel well. Remove the screws and clips from the inner trim and the lower underbody, freeing the side and lower mounts of the bumper.

From the engine compartment, unscrew the upper mounting points of the grille and bumper; then unclip the sides and slide the bumper forward, disconnecting the connectors. With the front exposed, locate the headlight mounting screws, unscrew them, disconnect the rear wiring, and pull the headlight assembly outwards.

Reassembly is the reverse, realigning the bumper, underbody, and wheel well.


Posted on 28 May 2026 by ScegliAuto


Related tutorials

How to Open the Hood of the Mercedes GLE
How to Open the Hood of the Mercedes GLE
Mercedes Gle (2019-2026 / V167) Follow these simple and quick steps to open the hood of the Mercedes GLE. First, open the driver's side door and pull the hood release lever located …
How to Replace the Headlight Bulb on a Mercedes GLE 350
How to Replace the Headlight Bulb on a Mercedes GLE 350
Mercedes Gle (2015-2019 / C292) If you own a Mercedes GLE 350 and want to learn how to safely and correctly replace the headlight bulb, follow the steps outlined in this guide. Firs…
What is the fuse diagram for the Mercedes GLE?
What is the fuse diagram for the Mercedes GLE?
Mercedes Gle (2019-2026 / V167) In this video, we can see where the fuse boxes of the Mercedes GLE are located and what their respective diagrams are, useful in case we need to chec…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos