Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Filter in a Mercedes Vito

Model: Mercedes Vito MK 1, W638 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Engine oil

See other generations:
Video tutorial

To replace the engine oil and filter in a Mercedes Vito, bring the engine to operating temperature and switch it off. After safely lifting the vehicle, unscrew the drain plug from the oil sump and allow the used lubricant to fully drain into a suitable container.

Next, remove the oil filter, replace the filter element or the complete filter depending on the engine type, and lubricate the seal of the new component with a thin layer of clean oil before installation.

Once the drain plug is reinstalled with the appropriate seal, fill the engine with oil as specified by the manufacturer. Finally, start the engine, check for leaks, and verify the oil level, topping up if necessary.


Posted on 7 July 2026 by ScegliAuto


Related tutorials

How to change the engine oil and filter on a Mercedes Vito W638
How to change the engine oil and filter on a Mercedes Vito W638
Mercedes Vito (1995-2003 / MK 1, W638) To change the oil on a Mercedes Vito W638, it is advisable to slightly warm the engine, then open the bonnet and unscrew the oil cap to facilitate dr…
How to Change the Engine Oil in a Mercedes Vito 1
How to Change the Engine Oil in a Mercedes Vito 1
Mercedes Vito (1995-2003 / MK 1, W638) Before proceeding with the engine oil replacement following the steps shown in the video, ensure you have all the necessary equipment, including a ne…
How to Change the Engine Oil on Mercedes Vito W639
How to Change the Engine Oil on Mercedes Vito W639
Mercedes Vito (2003-2013 / MK 2, W639) To facilitate the engine oil replacement on the Mercedes Vito W639, it is advisable to lift the vehicle on axle stands; otherwise, accessing the oil …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos