Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil and filter on a Mercedes Vito W638

Model: Mercedes Vito MK 1, W638 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Engine oil

See other generations:
Video tutorial

To change the oil on a Mercedes Vito W638, it is advisable to slightly warm the engine, then open the bonnet and unscrew the oil cap to facilitate draining. Next, lift the vehicle, clean the area around the drain plug, place a large container underneath, and unscrew the plug to allow complete drainage.

Meanwhile, replace the filter; clean the housing, unscrew the filter and remove it, cover the housing with a cloth, remove the old O-ring, clean the filter seats, fit the new O-ring lubricating it with new oil, and screw in the new filter first by hand and then to 25 Nm. Now clean the plug seat, replace the plug and washer, and pour in new oil to about 90% of the tank capacity.

Screw the oil cap back on and start the engine for 3 to 5 minutes until the light goes out. Wait 5 minutes, then check the level and add oil as necessary to reach "max". Dispose of used oil and the old filter properly at an authorised centre.


Posted on 1 August 2026 by ScegliAuto


Related tutorials

How to replace the air filter of the Mercedes Vito W638
How to replace the air filter of the Mercedes Vito W638
Mercedes Vito (1995-2003 / MK 1, W638) Let's see how to change the air filter on a Mercedes Vito W638: the filter is located in a black plastic box on the right side of the engine compartm…
How to Change the Engine Oil and Filter in a Mercedes Vito
How to Change the Engine Oil and Filter in a Mercedes Vito
Mercedes Vito (1995-2003 / MK 1, W638) To replace the engine oil and filter in a Mercedes Vito, bring the engine to operating temperature and switch it off. After safely lifting the vehicl…
Oil and Filter Change on a Mercedes Vito W638
Oil and Filter Change on a Mercedes Vito W638
Mercedes Vito (1995-2003 / MK 1, W638) Let's see how to change the oil and filter on a Mercedes Vito W638: open the bonnet and unscrew the oil cap to facilitate drainage, then lift the veh…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos