Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Shocks on a Mercedes GLC 300

Model: Mercedes Glc - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Shocks

See other generations:
Video tutorial

On the Mercedes GLC 300, the rear shocks are Bilstein B4 type, and you can find them on Auto-doc with EAN code 4025258603229 for $61.49 each, plus $9.95 for shipping. Before lifting the car, measure the height from the ground to the center of the hub to the edge of the wheel arch (about 17.5 inches): this will be needed for the final tightening.

Lift the car, place it on jack stands, and remove the wheel. Unscrew the clips of the plastic cover on the lower control arm (two per side) and remove it. Position a jack under the arm and slightly compress the suspension.

Unscrew the upper shock bolt (18 mm), holding the pin with a 16 mm socket on the other side. Unscrew the two lower 16 mm bolts and remove the old shock.

Before installing the new one, bleed it by compressing it five times. Pay attention to the orientation: the wider mount goes toward the inside of the car, the narrower one toward the wheel.

Reinstall the upper bolts by hand, then tighten to 37 lb-ft (about 50 Nm). Align the lower hole, insert the bolt, and tighten to 50 lb-ft (about 68 Nm) with the car lifted to 17.5 inches, to avoid preloading the rubber mount. Reinstall the cover, the wheel, and tighten the bolts to 100 lb-ft (about 135 Nm).


Posted on 21 November 2026 by ScegliAuto


Related tutorials

Mercedes Glc (2015-2022 / C253, MK 1, X253) The instructions in this guide will show us how to disassemble and replace the cabin air filter of the Mercedes GLC 300. First, let's get inside the …
Mercedes Glc (2015-2022 / C253, MK 1, X253) In this guide we will see the instructions that will allow us to disassemble and replace the rear lights and its bulbs of the Mercedes GLC. First, op…
Mercedes Glc (2015-2022 / C253, MK 1, X253) If you have a 2019 Mercedes GLC 300 and want to learn how to replace the engine air filter, follow the procedure below and apply the steps. First, li…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Reset the Air Conditioner on the Mercedes E-Class?

To reset the air conditioner on the Mercedes E-Class, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, press and hold the REST and 0 buttons located on the center panel of the dashboard. While holding these buttons, you will notice that the air conditioning settings will be restored to their default values. After the reset procedure is complete, you can turn off the ignition again by turning the key.

Watch the video!


by ScegliAuto

More videos