Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Battery from a Mercedes C-Class

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Battery

This video explains how to replace the battery in a Mercedes C-Class. Open the car door and pull up the hood release lever located at the bottom left of the dashboard, then lift the hood, disengaging the hood latch with your fingers. Secure it. Once the hood is open, you will find the battery at the top left; remove the nuts securing the battery terminals, then take the battery out of the engine compartment and replace it with a new one (same voltage). Close the hood after the replacement. Test the operation.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Battery on the Mercedes-Benz C-Class 200
Replacing the Battery on the Mercedes-Benz C-Class 200
Mercedes Classe C (2014-2021 / W205) .. and replace the battery on the Mercedes-Benz C-Class 200. First, open the hood of the vehicle and disconnect both battery terminals (positive and negative);.. …
How to Replace the Battery on a Mercedes-Benz C-Class
How to Replace the Battery on a Mercedes-Benz C-Class
Mercedes Classe C (2007-2013 / W204) .. and replace the battery on a Mercedes-Benz C-Class, following the instructions below. First, open the hood of your car and start by removing the plastic.. …
Replacing the Battery in a Mercedes-Benz C-Class
Replacing the Battery in a Mercedes-Benz C-Class
Mercedes Classe C (2007-2013 / W204) .. and replace the battery in a Mercedes-Benz C-Class. First, open the hood of your vehicle and start by removing the plastic cover located at the top.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Classe C 2007-2013 - Where is the auxiliary battery of a Mercedes C-Class located? Read answer
    • Classe C 2000-2007 - Where is the secondary battery of the Mercedes Benz W203 located? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos