Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe E
    4. : Remove the starter motor on Mercedes E

Mercedes Classe E - Video tutorial

Model: Mercedes Classe E W212 - Years 2009-2016
Part: Starter motor
Operation: Remove the starter motor on Mercedes E

Does the machine have ignition problems? Does the starter motor not work? Let's replace it. With a socket wrench we disconnect the cables of the car battery power supply. We lift the car on a column bridge, remove (with a socket wrench and nose pliers) the holding plate of the starter motor. We open the engine hood, remove the engine soundproofing panel with attached cables. We disassemble the container of the air filter, then, disconnect the terminals of the starter motor power supply with a pliers or screwdriver depending on the pressure of the tabs, unscrew the locking pins of the starter motor with a socket wrench and remove the same from the engine compartment. We mount the new ignition motor with the power cables. Let's see if the new piece works.


Posted on 29 November 2023 by ScegliAuto



How to replace the starter motor in the Mercedes E-Class?
Mercedes Classe E (2002-2009 / W211) In this tutorial, we can see how to replace the starter motor in the Mercedes E-Class, a simple operation that requires good manual dexterity. First
Mercedes E-Class 220 W210 starter motor replacement
Mercedes Classe E (1995-2002 / W210) Today we will see how to remove the starter motor of a Mercedes E-Class 220 W210. First we go to open and lift the engine hood: then we remove the pl
Starter motor protection fuse replacement
Mercedes Classe E (2002-2009 / W211) If it happens that while turning the ignition key the starter motor does not operate, it is not certain that it is a real failure of the motor itself

Other guides that may interest you

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos