Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe E
    4. : Alternator replacement of a Mercedes E-Class

Mercedes Classe E - Video tutorial

Model: Mercedes Classe E W212 - Years 2009-2016
Part: Alternator
Operation: Alternator replacement of a Mercedes E-Class

Doesn't the alternator on Mercedes E-Class show signs of life now? Let's see how it disassembles. We lift the bonnet putting it in safety, we identify the battery of the power supply and disconnect the terminals. We remove the radiator fan kit to take out the alternator. Unscrew the pins with a socket wrench, being careful not to damage the cable winding membranes, unscrew all the alternator tightening pins. Once the disassembly is finished, we can extract it from the engine compartment. We take the new replacement part and insert it into the suitable housing, screw in the locking pins, then tighten the side pins of the alternator. We assemble the kit of the air fans.


Posted on 2 December 2023 by ScegliAuto



How do you replace the alternator on your Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. In order to replace the Mercedes E-Class alternator, you need to go and open the bonnet, so that you can access the components located inside..
How to replace the alternator in the Mercedes E-Class?
Mercedes Classe E (1995-2002 / W210) .. how to replace the alternator in the Mercedes E-Class, an all in all simple operation but which requires good manual skills. First of all, open the bonnet..
Where are the fuses located in the Mercedes E-Class?
Mercedes Classe E (2002-2009 / W211) .. On the Mercedes E-Class, all fuses are divided into two fuse boxes that are installed on the vehicle: in this type of car..

Other guides that may interest you

    Frequently Asked Questions

    • Classe E 2002-2009 - Why did the battery light come on in the Mercedes E-Class? Read Answer

How do you reset the tire pressure warning light on Hyundai I10?

In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly.

Watch the video!


by ScegliAuto

More videos