Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Glow Plugs on a Mercedes ML

Model: Mercedes Classe M W164 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Glow plugs

See other generations:
Video tutorial

Are the glow plugs on your Mercedes ML damaged? Here’s how to remove them from above the engine. Pull the engine compartment release lever located at the bottom left of the dashboard and lift the front bonnet, securing it in place.

Remove the engine cover panel from the Mercedes, and take off any additional covers if present. Access the coils located above the glow plugs.

Grip the coil with your hands and twist it until it comes out of the cylinder head. Unscrew the glow plugs using a socket.

Take the new glow plug and insert it into the cylinder head with the socket. Start the Mercedes ML and check the operation.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

How to Replace the Glow Plugs in a Mercedes M-Class?
How to Replace the Glow Plugs in a Mercedes M-Class?
Mercedes Classe M (1997-2005 / W163) Replacing the glow plugs in a Mercedes M-Class is straightforward; follow this tutorial. First, clean the top of the engine thoroughly and spray some…
Replacing the Glow Plugs on the Mercedes ML
Replacing the Glow Plugs on the Mercedes ML
Mercedes Classe M (2005-2011 / W164) Discover how to remove and replace the glow plugs on the Mercedes ML with a V6 engine by following the instructions below. First, open the bonnet and…
How to Replace the Glow Plugs in a Mercedes ML?
How to Replace the Glow Plugs in a Mercedes ML?
Mercedes Classe M (1997-2005 / W163) In this tutorial, see how to replace the glow plugs in a Mercedes ML. This is a straightforward operation but requires some skill. Start by opening t…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos