Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : How to replace glow plugs in Mercedes ML?

Mercedes Classe M - Video tutorial

Model: Mercedes Classe M W163 - Years 1997-2005
Part: Glow plugs
Operation: How to replace glow plugs in Mercedes ML?

In this tutorial we can see how to replace the glow plugs in the Mercedes ML, a simple operation that requires manual skills. Let's start by opening the engine compartment, then identify all the glow plugs, apply some unlocking spray and wait a few minutes. Then disconnect the various connectors and pipes indicated, grab the first glow plug with the special 10mm spanner and unscrew it, avoiding applying excessive force. Once extracted, we can insert the spare, tighten it with a torque wrench set at 15nm and repeat the operation for the remaining glow plugs.


Posted on 29 November 2022 by ScegliAuto



Replacement glow plugs on Mercedes Ml
Mercedes Classe M (2005-2011 / W164) Are the Mercedes ML glow plugs damaged? Let's see how the M is removed from above. We pull the engine compartment opening lever located at the bottom
How to replace the glow plugs in the Mercedes M-Class?
Mercedes Classe M (1997-2005 / W163) Replacing the glow plugs in the Mercedes M-Class is very simple, let's see how to proceed in this tutorial. First, we clean the top of the engine tho
Mercedes ML glow plug replacement
Mercedes Classe M (2005-2011 / W164) Let's find out in this guide how to disassemble and replace the glow plugs of the Mercedes ML engine, with V6 engine, following the instructions belo

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos