Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Classe M
  6. : How to replace the glow plugs in the Mercedes M-Class?

Mercedes Classe M - Video tutorial

Model: Mercedes Classe M W163 - Years 1997-2005
Part: Glow plugs
Operation: How to replace the glow plugs in the Mercedes M-Class?

Replacing the glow plugs in the Mercedes M-Class is very simple, let's see how to proceed in this tutorial. First, we clean the top of the engine thoroughly and spray the unlocking spray on the glow plugs. In the meantime for this to take effect, we disconnect the various power cables with the help of a flat-tipped screwdriver and pliers. Then, with the special 10mm glow plug wrench, we start unscrewing carefully, without applying excessive force. Insert the spare glow plugs, tighten them using a torque wrench set at 10nm.


Posted on 14 September 2022 by ScegliAuto



Replacement glow plugs on Mercedes Ml
Mercedes Classe M (2005-2011 / W164) Are the Mercedes ML glow plugs damaged? Let's see how the M is removed from above. We pull the engine compartment opening lever located at the bottom
How to replace glow plugs in Mercedes ML?
Mercedes Classe M (1997-2005 / W163) .. In this tutorial we can see how to replace the glow plugs in the Mercedes ML, a simple operation that requires manual skills. Let's..
Mercedes ML glow plug replacement
Mercedes Classe M (2005-2011 / W164) Let's find out in this guide how to disassemble and replace the glow plugs of the Mercedes ML engine, with V6 engine, following the instructions belo

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos