Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Engine Fan Clutch

Model: Mercedes Classe E W210 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Electric cooling fan

See other generations:
Video tutorial

If the engine cooling system is not functioning properly, the problem may be due to a malfunctioning engine cooling fan. In this Mercedes E-Class, the fan spins, but its motion is too free: you need to replace its clutch that modulates the transmission of rotational motion.

Obtain a new clutch.

To access the faulty one, create some space: remove the two clips on the inner edge of the hood and the four adjacent bolts. Now that you have cleared the space, reach the center of the clutch with a 8 mm Allen wrench with an extension and loosen the central nut. To increase maneuvering space, you will also need to remove the timing belt and the water pump.

Once sufficient space is created, remove the fan and detach the clutch from it. To do this, unscrew the three fasteners with a 5 mm Allen wrench. Install the new one and reassemble everything as before.

After completing the operation, check the resistance of the new clutch.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

Mercedes Classe E (2002-2009 / W211) This guide provides instructions to remove and replace the cabin fan of the Mercedes E-Class. First, open the front door on the passenger side and st…
Mercedes Classe E (2009-2016 / W212) Today's instructions will show you how to disassemble and replace the cabin fan on a Mercedes E-Class. First, get inside the cabin and remove the pla…
Mercedes Classe E (2009-2016 / W212) How to remove the cabin air fan on a Mercedes E-Class. In this video, see how to perform the disassembly. Use a lever to remove the plastic cover und…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos