Do it yourself
Frequently asked questions about cars and motorcycles

Tip for Draining the Fuel Tank

Model: Mercedes Sprinter MK 2, W906 - Years 2006-2018
Part: Checks and maintenance

This video demonstrates a very simple method to drain the fuel tank, in case you need to replace it or, in the worst-case scenario, if an incorrect type of fuel has been introduced. First, remove the air filter by disconnecting the red knob on the left and the oil filler pipe on the right. Then, unscrew the intake pipe and the connectors. Now, detach the entire air filter housing from its supports. Next, remove the plastic cover from above the engine. Locate the fuel filter using the images provided. Disconnect the left pipe coming from the tank and using a short piece of rigid pipe, attach a second rubber hose that you will place into a collection container. Now, simply turn the ignition key and allow the pump to drain the fuel from the tank until you deem it appropriate. Car model: Mercedes Benz Sprinter 516
Required tools: flat screwdriver, a short metal pipe, and a rubber fuel hose, large container for liquids.

Updated on 11 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Mercedes Sprinter (2006-2018 / MK 2, W906) In today's video, you will see the main instructions for dismantling the fuel tank of the second generation Mercedes Sprinter. First, open the fuel f…
Mercedes Sprinter (2018-2026 / MK 3, Br910, Br907) If the AdBlue warning light has illuminated on the dashboard of your Mercedes Sprinter van, it means that the emissions fluid has reached a low level…
Mercedes Sprinter (2006-2018 / MK 2, W906) It will be possible to make the AdBlue warning light on the Mercedes Sprinter completely disappear from the vehicle's instrument panel by first refil…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos