Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Replacement Instructions

Model: Mercedes Sprinter MK 1, W901 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Engine oil

See other generations:
This video is currently unavailable

Once you have raised the vehicle using a lift or suitable ramps, it is very simple to locate the drain plug of the oil sump, which is situated at the rear right corner of the sump. Unscrew the plug to allow the old oil to drain out, and once the draining is complete, screw the plug back in. Then access the engine bay to refill the engine with new oil (check the SAE specifications and quantities in the owner's manual) ensuring you accurately respect the level without exceeding the maximum.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Full Service Instructions
Mercedes Sprinter (2006-2018 / MK 2, W906) During the routine service, it is good practice to carry out a series of checks that are often overlooked. Once the vehicle is raised on the lift, in…
How to perform an oil change on a Mercedes Sprinter.
How to perform an oil change on a Mercedes Sprinter.
Mercedes Sprinter (2018-2026 / Br907, Br910, MK 3) Today we will show you how to change the engine oil on a Mercedes Sprinter 3.0 diesel. To perform the oil change, we need to purchase a canister of e…
Oil and Oil Filter Change on a Mercedes Sprinter
Oil and Oil Filter Change on a Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) Work underneath the vehicle, specifically under the engine bay, and unscrew the 13 mm bolt that acts as a plug for the drain hole. Use a socket spann…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos