Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Battery in the Mercedes E-Class?

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Battery

See other generations:
Video tutorial

Replacing the battery in the Mercedes E-Class is a very simple and quick operation; let's see how to proceed in this tutorial. Before doing this, ensure that the key is not inserted for safety.

Start by opening the hood, then remove the cover located in front of the windshield on the passenger side by unlocking the corresponding clip. Next, loosen the negative terminal nut with a 10mm wrench, disconnect it, and repeat the process for the positive terminal.

Finally, unscrew the lower bolt with a 13mm wrench, remove the battery from the housing, and install the replacement by following the reverse procedure.


Updated on 20 June 2026 by ScegliAuto


Related tutorials

Mercedes Classe E (2009-2016 / W212) .. ensure safety by positioning your Mercedes E-Class on a lift or flat surface. Next, open the hood and locate the battery housing, which is situated.. …
Mercedes Classe E (2016-2023 / W213) .. To replace the battery in a Mercedes E-Class, open the hood to access the components in the engine compartment. Here, in the upper right corner,.. …
Mercedes Classe E (2009-2016 / W212) .. To replace the battery in a Mercedes E-Class, open the hood to access the components inside the engine compartment: here you will find a cover.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Classe E 2009-2016 - Where is the battery of the Mercedes E-Class located? Read answer
    • Classe E 2016-2023 - Where is the auxiliary battery of the Mercedes Benz E-Class W213 located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos