Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Classe C
  6. : How do you replace the diesel filter on the Mercedes C-Class?

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Diesel filter
Operation: How do you replace the diesel filter on the Mercedes C-Class?

In order to replace the diesel filter on the Mercedes C-Class, you need to open the bonnet, so that you can access the components located inside the engine compartment: first of all, you will have to remove the plastic cover from the upper part of the engine block, identifying the corresponding diesel filter on its right. This must be freed from its pipes and also from the connector connected to the sensor placed on it: once the screws that fix it have also been unscrewed, the filter can be extracted from inside its housing and replaced with a new one.


Posted on 26 December 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos