Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Windshield Washer Reservoir Removal Instructions

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Windshield wipers

The windshield washer reservoir is located at the front left of the engine compartment, just below the headlight: to remove it, you must first take off the bumper (refer to the appropriate video); once the bumper is removed, unscrew the mounting screws of the reservoir (one on the frame, one on the fender, and finally one near the fill cap), disconnect the connector from the pump, and complete the removal; if necessary, you can separate the reservoir from the fill tube: they are connected via a pressure flange, and you just need to pry between the two parts to separate them.

Updated on 16 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Windshield Washer Pump on the Mercedes C-Class
Replacing the Windshield Washer Pump on the Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) Follow these instructions to remove and replace the windshield washer pump on the Mercedes C-Class. First, lift the vehicle and remove the left front…
Windshield Washer Fluid Replacement on Mercedes C-Class
Windshield Washer Fluid Replacement on Mercedes C-Class
Mercedes Classe C (2014-2021 / W205) Learn how to top off the windshield washer fluid on a Mercedes C-Class. Pull the plastic lever located at the bottom left of the dashboard, lift the …
Replacing the Windshield Washer Reservoir and Pump on the Mercedes C-Class W204
Replacing the Windshield Washer Reservoir and Pump on the Mercedes C-Class W204
Mercedes Classe C (2007-2013 / W204) This guide provides the main instructions for removing and replacing the windshield washer reservoir and pump on the Mercedes Benz C-Class W204. Firs…

Other guides you may be interested in

Resetting the Tyre Pressure Warning Light on the Hyundai I20

The following instructions will show you how to reset the tyre pressure warning light on the Hyundai I20; before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get in the vehicle and turn on the ignition; press and hold the TPMS button located on the controls to the left of the steering wheel, as well as on the dashboard, as shown in the video. If the tyre pressures are correct, the warning light will automatically reset on the instrument panel; finally, turn off the ignition and start the engine!

Watch the video!


by ScegliAuto

More videos