Do it yourself
Frequently asked questions about cars and motorcycles

How to Locate the Fuse Boxes and Their Assignments in a Mercedes Benz Vito

Model: Mercedes Vito MK 2, W639 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013

See other generations:
Video tutorial

This video tutorial shows how to locate the fuse boxes in a Mercedes Benz Vito produced from 2004 to 2010 and the assignment of the respective fuse functions. The main fuse box can be found in the engine compartment, on the passenger side, and in this box, you will find fuses assigned to the horn, windscreen wipers, instrument cluster, braking system, fuel pump, cigarette lighter, radio, control panel, air conditioning, etc. In fuse block F34, you will find fuses assigned to the front lights, light switch, and upper part of the control panel, front air conditioning, entertainment socket in the rear compartment, mobile control module/CD changer, diagnostic socket, diagnostic and audio gateway, ATA battery horn, steering lock, ABS control unit, etc. Fuse block F35 contains fuses assigned to the cabin power sockets, seat adjustment, air suspension system, and tyre pressure monitoring system, audio system, etc. Finally, the second fuse box is located under the driver's seat, and in this box, you will find fuses assigned to: SAm-SRB, left and right door control unit, PSM control unit, 12-volt sockets, vehicle battery charging line, light timer, auxiliary heating, and sunroof.


Updated on 9 July 2026 by ScegliAuto


Related tutorials

Mercedes Vito (2003-2013 / MK 2, W639) This brief video tutorial shows the location of the fuse boxes on a second-generation Mercedes Benz Vito, specifically produced from 2010 to 2014. Th…
Mercedes Vito (2014-2024 / MK 3, W447) Today, we will see the instructions that will allow you to locate the fuse boxes of the Mercedes Vito, in simple and quick steps. First, locate the e…
Mercedes Vito (2014-2024 / MK 3, W447) Below, we will see the positioning and diagram of the fuse boxes of the Mercedes Vito, following these simple steps. First, open the bonnet to locate…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos