Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. CLS
    4. : Engine oil level check instructions

Mercedes CLS - Video tutorial

Model: Mercedes CLS C219, MK 1 - Years 2004-2010
Part: Engine oil
Operation: Engine oil level check instructions

The engine of the car in question does not have a stick for checking the engine oil level but is equipped with an electronic sensor and the level is checked through the on-board computer menu: then turn on the ignition and using the buttons on the steering wheel , select the engine oil level check function; after a few seconds you will get an answer relating to the state of the level with an indication of the quantity of oil to add to restore the maximum level; then top up by first assessing the remaining mileage for the next maintenance: if there are a few kilometers left, it is advisable to change the oil rather than top up.


Posted on 25 August 2023 by ScegliAuto



How to remove the AdBlue warning light on the Mercedes CLS?
Mercedes CLS (2010-2018 / C218, MK 2) If the AdBlue light in our car turns on, it means that the pollution liquid has reached the minimum level and therefore needs to be refilled. This is
Instructions for disassembling the fuel pump / float on Mercedes CLS 500
Mercedes CLS (2004-2010 / C219, MK 1) Today we will see the necessary instructions to disassemble and replace the fuel pump or the float pump on the Mercedes Benz CLS 500, first series. F
How do you perform the B5 service of the Mercedes CLS?
Mercedes CLS (2010-2018 / C218, MK 2) In order to perform the B5 service on the Mercedes CLS, you need to follow all the operations shown in the video. It starts with changing the oil, by

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos