Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to set the time on a Mercedes C-Class W204

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: -board computer
Operation: How to set the time on a Mercedes C-Class W204

Thanks to today's very short video tutorial, we can see the necessary procedure for changing the time on the on-board computer of our Mercedes C-Class, model W204 produced from 2007 to 2013. First of all, we turn on the vehicle's instrument panel without the need to start the engine, then we press the "SYS" System button located on the left of the radio controls. Once this is done, a menu will appear on the information display, so using the knob located on the central tunnel, we select the "Time" option and then "Set Time", from here we can use the knob to make the time change.


Posted on 4 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2014-2021 - What does the check engine light on Mercedes C-Class signal? Read Answer
    • Classe C 2014-2021 - What does the Mercedes C200 restraint system warning light mean? Read Answer
    • Classe C 2014-2021 - Where can I find the navigation updates of the Mercedes C-Class W204? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos