Do it yourself
Frequently asked questions about cars and motorcycles

Things to Know About the Mercedes E-Class W211

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Body

Video tutorial

In this video, you will see some things to know about the Mercedes E-Class W211 that not everyone may be aware of. If you look at your car key, you will notice that there is another key inside. This is the security key, which is used to unlock the vehicle in case of emergency, but it also locks the glove compartment, and you can give it to the valet.

It is also used to open the trunk lock in case the remote is dead. You can even enter through the trunk itself.

The sun visor can not only be turned to the side of the window, but it can also be extended significantly. In the compartment located to the right of the radio, you can press from underneath to release the papers and take them out easily.

Regarding vehicles with automatic transmission, you do not need to turn the key all the way to the right to start: a light tap will start the vehicle. It may seem unnecessary, but the YouTuber wants to remind you that a light pressure is enough to activate the windshield wipers, and a firmer press is needed for the sprayer.


Updated on 22 July 2026 by ScegliAuto


Related tutorials

Mercedes Classe E (2002-2009 / W211) In this video, we will see where the auxiliary battery is located on the Mercedes E220 W211: you need to open the hood of the vehicle because the aux…
Mercedes Classe E (2002-2009 / W211) .. the cabin fuse box is located in your Mercedes E-Class W211, don't worry because the following guide describes all the steps you need to follow. First,.. …
Mercedes Classe E (2002-2009 / W211) .. locate the OBD2 port inside your Mercedes E-Class W211, just read the following guide carefully and follow the steps described. Once inside the vehicle,.. …

Other guides you may be interested in

How to reset the Service light of the Fiat 500X?

To reset the Service light of the Fiat 500X, insert the ignition key into the ignition switch to turn on the instrument cluster. Once powered on, press the accelerator pedal three times in quick succession. After this operation, wait a few seconds for the Service light reset to complete. Once the reset procedure is finished, release the pedals and then turn off the instrument cluster by turning the key.

Watch the video!


by ScegliAuto

More videos