Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Car Control Arm

Model: Mercedes Clk A208, W208, C208 - Years 1997-2003
Part: Control arm

The suspension arm of the car connects the chassis to the struts. However, it can wear out over time or due to impacts, and a faulty arm can lead to a loss of vehicle control. Replacing it yourself is not overly complicated and can save you a considerable amount of money. The following guide shows you how to do it. Lift the car with a jack, then remove the wheel by unscrewing the bolts. Disconnect the stabiliser link from the arm using two spanners. The arm, which is in front of you, is secured with bolts; once these are removed, it can be replaced.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Clk (1997-2003 / A208, W208, C208) If the rubber bush attached to the suspension arm connected to the steering rack tie rod fails, it can be replaced quickly and economically; lift the…
Mercedes Clk (1997-2003 / A208, W208, C208) When the silent block bushes of the suspension wishbones fail, various noises can be heard in the cabin, especially when driving over rough surfaces:…
Mercedes Clk (1997-2003 / A208, W208, C208) Replacing the rear shock absorbers is significantly simpler than replacing the front ones, as the spring and damper are not co-axial, so there is no …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos