Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe B
    4. : How to disassemble the steering wheel airbag in the Mercedes B-Class?

Mercedes Classe B - Video tutorial

Model: Mercedes Classe B MK 1, W245 - Years 2005-2011
Part: Airbags
Operation: How to disassemble the steering wheel airbag in the Mercedes B-Class?

In this tutorial, we can see how to disassemble the steering wheel airbag in the Mercedes Classe B, a very simple and quick operation. Before doing this, we disconnect the negative terminal of the battery in order to avoid accidental activation of the device. We start by sitting in the driver's seat, then we locate the two holes located in the rear area of the steering wheel and, using a Torx T27 screwdriver, unscrew the screws inside them. We then grip the airbag, pull it outwards, and separate it from the steering wheel. At this point, all that remains is to disconnect the connector and install the replacement if necessary.


Posted on 22 August 2023 by ScegliAuto



How to remove the steering wheel airbag on Mercedes B-Class
Mercedes Classe B (2011-2019 / MK 2, W246) Disconnect the battery: before starting, it is essential to disconnect the negative terminal of the battery to avoid the risk of accidental activatio
Disassembly of the steering wheel on Mercedes B-Class
Mercedes Classe B (2011-2019 / MK 2, W246) Let's start with the disassembly of the airbag. Look behind the steering wheel and notice the two holes inside which there are torx T30s that you wil
How to remove the airbag of the Mercedes B-Class.
Mercedes Classe B (2011-2019 / MK 2, W246) .. Removing the airbag from the Mercedes Classe B, model produced from 2011 to 2019, is a fairly simple operation that can be done independently..

Other guides that may interest you

    Frequently Asked Questions

    • Classe B 2019-2026 - Why did the "SRS" warning light come on in the dashboard of the Mercedes B-Class? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos