Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Vito
    4. : How to reset the service on a 2019 Mercedes Vito.

Mercedes Vito - Video tutorial

Model: Mercedes Vito W447, MK 3 - Years 2014-2024
Part: -board computer
Operation: How to reset the service on a 2019 Mercedes Vito.

In this video tutorial, we can see how to perform a service reset on a 2019 Mercedes Vito, following a few simple steps, allowing us to work independently. First, we need to perform the maintenance, replacing the engine oil and filters. The next step is to get into the vehicle, turn on the ignition, and make sure the mileage display is active. Press the phone button, then press and hold the OK button. Now, scroll down using the arrow buttons on the steering wheel. Press the OK button to confirm the service reset. The service reset is complete. Turn off and restart the ignition to verify the correct reset.


Posted on 28 August 2023 by ScegliAuto



How to reset the service in the Mercedes Vito van?
Mercedes Vito (2014-2024 / W447, MK 3) In this tutorial, we can see how to reset the service on the Mercedes Vito van, an extremely simple and quick operation, to be done only after comple
How to reset the service light on a 2016 Mercedes Vito
Mercedes Vito (2014-2024 / W447, MK 3) In this video tutorial, we are shown how to reset the service light on a 2016 Mercedes Vito. This procedure is necessary if the light remains on even
How to reset the service light on the 2019 Mercedes Vito.
Mercedes Vito (2014-2024 / W447, MK 3) In the following guide, we will discover how to manually reset the service light on your Mercedes Vito Mk3 (2019). The step-by-step procedure we will

Other guides that may interest you

How do you reset the tire pressure warning light on Hyundai I10?

In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly.

Watch the video!


by ScegliAuto

More videos