Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlights on a Mercedes Benz

Model: Mercedes Classe A W177 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Headlight

See other generations:
Video tutorial

Replacing the headlights on a Mercedes A-Class can take a few hours of your time, even though the steps are simple to follow. After removing the front bumper by unscrewing the lower screws first and then the upper ones, proceed to disassemble the headlights.

The first step is to remove all the screws securing it both internally and externally; for this operation, you will need a Torx wrench. Next, disconnect the internal connector of the headlight and pull it out. Once removed, you can perform any maintenance you deem necessary.

The same procedure applies to the left headlight.


Updated on 28 August 2026 by ScegliAuto


Related tutorials

How to Replace the Front Windshield Wiper Blades on the Mercedes Benz A-Class W176
How to Replace the Front Windshield Wiper Blades on the Mercedes Benz A-Class W176
Mercedes Classe A (2012-2018 / W176) This guide shows how to replace the front windshield wiper blades on the Mercedes Benz A-Class W176. This operation takes only a few seconds and does…
How to Replace the Low Beam Headlight Bulbs on the New Mercedes A-Class 180 Sport
How to Replace the Low Beam Headlight Bulbs on the New Mercedes A-Class 180 Sport
Mercedes Classe A (2012-2018 / W176) Learn how to replace the low beam headlight bulbs on the new Mercedes A-Class 180 Sport. On this vehicle, access to the front headlight bulbs is loca…
How to Replace the Battery on the Mercedes Benz A-Class A200 W176
How to Replace the Battery on the Mercedes Benz A-Class A200 W176
Mercedes Classe A (2012-2018 / W176) This guide shows how to replace the battery on the Mercedes Benz A-Class A200 W176. The first step is to open the hood and remove the protective cove…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos