Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Car Air Conditioner

Model: Mercedes Classe E W210 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: A/C controls

See other generations:
Video tutorial

One of the most appreciated car accessories, especially in the summer months when the heat is relentless, is definitely the air conditioner. However, it may happen that it does not work well and that its controls need to be repaired or replaced.

You can do this independently, without resorting to specialized workers. The first thing to check is that the refrigerant, the fluid that carries heat from inside to outside the car, is present in its reservoir.

After locating the position of the compressor under the hood, start the car and turn on the air conditioning. If the pin on the pulley does not rotate, the system may have some issues.

If the problem is with the wiring, just locate the compressor wire and connect it to the positive terminal of the battery. If you hear a noise, the compressor and its switches are working well; otherwise, the entire system needs to be checked, and the compressor should be replaced.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

Mercedes Classe E (2009-2016 / W212) These brief and simple steps will show you the procedure for removing and replacing the air conditioning compressor pulley on the Mercedes E-Class. F…
Mercedes Classe E (1995-2002 / W210) The car air conditioner is designed to move heat from one part of the car to another. It is like a refrigerator with an unusual configuration. During…
Mercedes Classe E (1995-2002 / W210) In this guide we will see the instructions that will allow us to reset the automatic air conditioning of the Mercedes E-Class. First of all, we get o…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos