Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Poly-V Belt of the Mercedes W201

Model: Mercedes 190 W201 - Years: 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993
Part: Timing belt

Video tutorial

Replacing the timing belt of a Mercedes 190, model W201, is a fairly easy task that can be done independently, aided by our short video tutorial that will illustrate the most important steps for the replacement and installation of a timing belt. Start the replacement by opening the bonnet and covering the outer part of the bodywork with a soft cloth.

Using a 17 mm spanner, unscrew the fixing bolt of the tensioner, and with a 13 mm combination spanner, loosen the tensioner. At this point, you can remove the belt and insert the new one, as shown in the video.

Now begin the assembly process. With the 13 mm spanner, tighten the tensioner, and with the 17 mm spanner, screw in the fixing bolt.

Run the engine for a few minutes and then close the bonnet.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

How to Replace the Bonnet Struts on a Mercedes W201
How to Replace the Bonnet Struts on a Mercedes W201
Mercedes 190 (1982-1993 / W201) Replacing the bonnet struts on the Mercedes 190 model W201 is straightforward. First, lift the front bonnet and secure it at the sides with wooden st…
How to Replace the Front Control Arm on a Mercedes W201?
How to Replace the Front Control Arm on a Mercedes W201?
Mercedes 190 (1982-1993 / W201) Replacing the front control arm on a Mercedes 190, model W201, is very simple with our guide and the following video tutorial. Start the replacement …
How to Replace the Air Filter on the Mercedes W201
How to Replace the Air Filter on the Mercedes W201
Mercedes 190 (1982-1993 / W201) Today, with the help of the following video tutorial, you will learn how to replace the air filter on the Mercedes 190, model W201. The first step is…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos