Do it yourself
Frequently asked questions about cars and motorcycles

Resetting the Service Light on the Mercedes-Benz C-Class

Model: Mercedes Classe C W206 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

After changing the engine oil on your Mercedes-Benz C-Class, you need to reset the system that alerts you when to perform this service. Sit in the driver's seat and turn on the instrument cluster using the buttons on the left side of the steering wheel.

Select the odometer on the central display, press the "home" button for ten seconds, release it, and then press the "ok" button for another ten seconds. A menu will appear on the display from which you need to select "assist plus". Press the ignition button and confirm "full service", then confirm the first option in the next menu, and continue confirming the options presented until the message "Full service completed" appears.


Updated on 19 September 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) ..ow to reset the light on the Mercedes C-Class. First, get in the vehicle and turn on the ignition. Next, press the settings button and navigate t.. …
Mercedes Classe C (2007-2013 / W204) .. to reset the service indicator on a Mercedes C-Class vehicle. To reset the service light and update the mileage for the next service interval, press.. …
Mercedes Classe C (2007-2013 / W204) .. To reset the service light on a Mercedes C-Class vehicle produced from 2007 to 2014, do the following: - Turn on the vehicle's ignition; - Press.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos